Thiết bị định tuyến Router Cisco SPA112 Chính hãng
I. Bộ điều hợp cổng SPA112 có nên tin dùng?
Bộ điều hợp cổng Cisco SPA112 cho phép dịch vụ VoIP chất lượng cao với tính năng toàn diện được thiết lập thông qua kết nối Internet băng thông rộng. Dễ dàng cài đặt và sử dụng, nó hoạt động qua mạng IP để kết nối điện thoại analog và máy fax với nhà cung cấp dịch vụ VoIP và cung cấp hỗ trợ cho các kết nối LAN bổ sung.
Cisco SPA112 bao gồm hai cổng điện thoại tiêu chuẩn để kết nối điện thoại analog hoặc máy fax hiện có với nhà cung cấp dịch vụ VoIP. Mỗi dòng điện thoại có thể được cấu hình độc lập. Với Cisco SPA112, người dùng có thể bảo vệ và mở rộng đầu tư vào điện thoại analog, loa hội nghị và máy fax hiện tại cũng như kiểm soát việc di chuyển sang giọng nói IP bằng một giải pháp đáng tin cậy, cực kỳ hợp lý.
Thiết kế nhỏ gọn và tương thích với các tiêu chuẩn thoại và dữ liệu quốc tế, Cisco SPA112 có thể được sử dụng với các dịch vụ VoIP dành cho dân cư, văn phòng tại nhà và doanh nghiệp nhỏ, bao gồm các môi trường tổng đài IP nguồn mở được lưu trữ đầy đủ tính năng. Giải pháp dễ sử dụng này cung cấp các tính năng nâng cao để kết nối tốt hơn với nhân viên và phục vụ khách hàng, tất cả trên mạng Cisco có độ an toàn cao.
Thông số kĩ thuật chi tiết Thiết bị định tuyến Router Cisco SPA112
Thông số kỹ thuật | Mô tả |
Data networking | MAC address (IEEE 802.3) |
IPv4 (RFC 791) upgradeable to IPv6 (RFC 1883) | |
Address Resolution Protocol (ARP) | |
Domain Name System (DNS) A record (RFC 1706) and SRV record (RFC 2782) | |
Dynamic Host Configuration Protocol (DHCP) client (RFC 2131) | |
Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516) | |
Internet Control Message Protocol (ICMP) (RFC 792) | |
TCP (RFC 793) | |
User Datagram Protocol (UDP) (RFC 768) | |
Real Time Protocol (RTP) (RFC 1889) (RFC 1890) | |
Real Time Control Protocol (RTCP) (RFC 1889) | |
VLAN tagging (IEEE 802.1p) | |
Simple Network Time Protocol (SNTP) (RFC 2030) | |
SIP channels support for both UDP and TCP transport | |
Voice gateway | SIPv2 (RFC 3261, 3262, 3263, and 3264) |
SIP proxy redundancy: Dynamic through use of DNS SRV A records | |
Reregistration with primary SIP proxy server | |
SIP support in network address translation (NAT) networks (including Serial Tunnel [STUN]) | |
Highly secure (encrypted) calling using Secure RTP (SRTP) | |
Codec name assignment | |
G.711 (A-law and μ-law) | |
G.726 (32 kbps) | |
G.729 A | |
Dynamic payload | |
Adjustable audio frames per packet | |
Dual-tone multifrequency (DTMF): In-band and out-of-band (RFC 2833) (SIP information) | |
Voice features | Independent configurable dial plans with interdigit timers and IP dialing (1 per port) |
Call progress tone generation | |
Jitter buffer: Adaptive | |
Frame loss concealment | |
Full-duplex audio | |
Echo cancellation (G.165 and G.168) | |
Voice activity detection (VAD) | |
Silence suppression | |
Comfort noise generation (CNG) | |
Attenuation and gain adjustments | |
Flash hook timer | |
Message waiting indicator (MWI) tones | |
Visual messaging waiting indicator (VMWI) using frequency shift keying (FSK) | |
Polarity control | |
Hook flash event signaling | |
Caller ID generation (name and number): Bellcore, DTMF, and European Telecommunications Standards Institute (ETSI) | |
Streaming audio server: Up to 10 sessions | |
Music on hold | |
Call waiting, call waiting and caller ID | |
Caller ID with name and number | |
Caller ID blocking | |
Selective and anonymous call rejection | |
Call forwarding: No answer, busy, and all | |
Do not disturb | |
Call transfer, call return, and call back on busy | |
Three-way conference calling with local mixing | |
Per-call authentication and associated routing | |
Call blocking with toll restriction | |
Distinctive ringing: Calling and called number | |
Off-hook warning tone | |
Advanced inbound and outbound call routing | |
Hotline and warmline calling | |
Long silence (configurable time setting) silence threshold | |
Disconnect tone (for example, reorder tone) | |
Configurable ring frequency | |
Ring validation time setting | |
Tip and ring voltage adjustment setting | |
Ring indication delay setting | |
Fax capability | Fax tone detection pass-through |
Fax pass-through using G.711 | |
Real-time fax over IP using T.38 fax relay (T.38 support is dependent on fax machine and network and transport resilience) | |
Bảo mật | Password-protected system reset to factory default |
Password-protected administrator and user access authority | |
Provisioning, configuration, and authentication | |
HTTPS with factory-installed client certificate | |
HTTP digest: Encrypted authentication using MD5 (RFC 1321) | |
Up to 256-bit Advanced Encryption Standard (AES) encryption | |
SIP Transport Layer Security (TLS) | |
Provisioning, administration, and maintenance | Web browser administration and configuration using integral web server |
Telephone keypad configuration with interactive voice prompts | |
Automated provisioning and upgrade using HTTPS, HTTP, and Trivial File Transfer Protocol (TFTP) | |
TR-069 | |
Asynchronous notification of upgrade availability using Notify | |
Nonintrusive, in-service upgrades | |
Report generation and event logging | |
Statistics in Bye message | |
Debug server records and syslog: Per-line configurable web browser | |
Ping and traceroute diagnostics | |
Configuration management: Backup and restore | |
Support for Bonjour | |
Physical interfaces | 1 WAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3) |
2 RJ-11 FXS phone ports for analog circuit telephone device (tip and ring) | |
Reset button | |
Subscriber line interface circuit (SLIC) | Ring voltage: 40-90 Vpk configurable |
Ring frequency: 20-25 Hz | |
Ring waveform: trapezoidal | |
Maximum ringer load: 5 ringer equivalence numbers (RENs) | |
On-hook voltage (tip and ring): -46 to -56V | |
Off-hook current: 18-25 mA | |
Terminating impedance: 600 ohm resistive or 270 ohm + 750 ohm | |
150 nF complex impedance | |
Frequency response: 300-3400 Hz | |
Return loss (600 ohm, 300-3400 Hz): up to 20 dB | |
Insertion loss (1 Vrms at 1 kHz): 3-4 dB | |
Total harmonic distortion (THD) (350 mV peak at 300 Hz): up to 3% | |
Idle channel noise: 72 dB (typical) | |
Longitudinal balance: 55 dB (typical) | |
Off-hook threshold (line seizure): Rdc < 1000 ohm | |
On-hook threshold (line release): Rdc >10000 ohm | |
Rdc DC supervisory range: Rdc > 450 ohm | |
Regulatory compliance | FCC (Part 15 Class B), CE, ICES-003, A-Tick certification, Restriction of Hazardous Substances (RoHS), and UL |
Nguồn cấp | DC input voltage: 5V DC at 2.0A maximum |
Power consumption: 5W | |
Switching type (100-240V) automatic | |
Power adapter: 100-240V and 50-60 Hz (26-34 VA) AC input, with 1.8m cord | |
Indicator lights and LEDs | Phone 1, phone 2, Internet, and power |
Kích thước (W x H x D) | 3.98 x 3.98 x 1.10 in. (101 x 101 x 28 mm) |
Unit weight | 5.40 oz (153 g) |
Operating temperature | 32 to 113ºF (0 to 45ºC) |
II. Địa điểm phân phối chính hãng sản phẩm SPA112
SSS Việt Nam tự hào là nhà phân phối chính hãng sản phẩm SPA112 hay các sản phẩm thiết bị mạng khác đến từ thương hiệu Cisco. Chúng tôi luôn tự tin với chất lượng và độ uy tín của mình qua nhiều năm phát triển trong lĩnh vực này, đồng thời luôn tự tin cam kết các sản phẩm được đưa đến tay khách hàng với đầy đủ CO/CQ, bảo hành chính hãng và đội ngũ kĩ thuật lắp đặt chuyên nghiệp. Vì vậy hãy liên hệ ngay với chúng tôi để nhận được báo giá, hỗ trợ và đặt mua sản phẩm:
Công Ty Cổ Phần SSS Việt Nam
Trụ sở: Số 275 Đường Ngọc Hồi, Huyện Thanh Trì, TP. Hà Nội
VPGD: SSS Building, 10 Ngách 2 Ngõ 124 Minh Khai, Hai Bà Trưng, Hà Nội
Điện thoại: (+84-48)35148999 – Fax: (84-48) 36285892
Hotline: +84 982 82 59 82
Địa chỉ email:Contact@sss.net.vn
Skype ID: tuanpt38
Trả lời